If the wind is so strong that the spine and bow are severely distorted, no amount of bridle tuning will help with making the kite controllable. Bridling and tuning are only effective when the kite chosen is able to handle the amount of wind that it is being flown in. The design of the kite plays a role in the tendency for the kite to spin and pull, and how much wind the kite can handle. Left and right tracking are adjusted by either placing weight on the tip of a wing, or by weakening the bow on the side that the flier wants the kite to track towards. To make the kite spin more, the upper bridle line is shortened: to make the kite spin less, the lower bridle line is shortened. The spine of the kite has a slight convex curve toward the face of the kite. The length of the bottom bridle to the tow point is between 1⁄ 2 and 2 inches (13 and 51 mm) longer than the length of the two spine connections. The length of the top line to the tow point is the length between the two bridle to spine connection points. The second attachment is three-quarters to two-thirds of the total length of the spine from the nose of the kite. The first place is at the crossing of the bow and the spine. Afghan and Indian fighter kites and their variants have their bridles attached in two places on the kite's spine.
Gelasan – The cutting line thread used in Indonesiaīridle position, spine curve, centre of gravity, and balance of tension on the spars all play a role in how the kite spins and tracks.Kai Po Chhe – the winner says this to proclaim victory.Manjha – cutting line of India, Bangladesh and Pakistan (but manjho in Rajasthan).Cerol – The cutting line /thread used in Brazil.Hilo de competencia (o Hilo Curado) – The cutting line used in Chile.
#Kite fighting pakistan pro
Power Pro – A very thin braided fishing line used for American kite fighting.Spectra – A brand of fishing line used for American kite fighting.The spine may still be bamboo, but often along with the bow is constructed of fiberglass or carbon fibre.
In modern American fighters, the kite skins are made from a variety of synthetic materials – mylar, aircraft insulation (orcon or insulfab), nylon, and polyester sheeting. In most traditional fighter kite manufacture, the skins of kites are made from a lightweight thin paper and the spars are usually made from a lightweight and flexible wood, usually bamboo. Kite fighting is contested in many countries, but particularly in Afghanistan, Bangladesh, India, Indonesia, Nepal, Pakistan, Vietnam, Korea, Thailand, Chile and Brazil. Traditionally most are small, unstable single-line flat kites where line tension alone is used for control, at least part of which is manja, typically glass-coated cotton strands, to cut down the line of others. Duelling chula and pakpao kites, part of the Thai kite-fighting traditionįighter kites are kites used for the sport of kite fighting.
0 kommentar(er)
